NOTE: click here if you get an empty page.


GETRLIMIT(2)		   Linux Programmer's Manual		  GETRLIMIT(2)

NAME

getrlimit, setrlimit - get/set resource limits

SYNOPSIS

#include <sys/time.h> #include <sys/resource.h> int getrlimit(int resource, struct rlimit *rlim); int setrlimit(int resource, const struct rlimit *rlim);

DESCRIPTION

getrlimit() and setrlimit() get and set resource limits respectively. Each resource has an associated soft and hard limit, as defined by the rlimit structure (the rlim argument to both getrlimit() and setr- limit()): struct rlimit { rlim_t rlim_cur; /* Soft limit */ rlim_t rlim_max; /* Hard limit (ceiling for rlim_cur) */ }; The soft limit is the value that the kernel enforces for the corre- sponding resource. The hard limit acts as a ceiling for the soft limit: an unprivileged process may only set its soft limit to a value in the range from 0 up to the hard limit, and (irreversibly) lower its hard limit. A privileged process (under Linux: one with the CAP_SYS_RESOURCE capability) may make arbitrary changes to either limit value. The value RLIM_INFINITY denotes no limit on a resource (both in the structure returned by getrlimit() and in the structure passed to setr- limit()). resource must be one of: RLIMIT_AS The maximum size of the process's virtual memory (address space) in bytes. This limit affects calls to brk(2), mmap(2) and mremap(2), which fail with the error ENOMEM upon exceeding this limit. Also automatic stack expansion will fail (and generate a SIGSEGV that kills the process if no alternate stack has been made available via sigaltstack(2)). Since the value is a long, on machines with a 32-bit long either this limit is at most 2 GiB, or this resource is unlimited. RLIMIT_CORE Maximum size of core file. When 0 no core dump files are cre- ated. When non-zero, larger dumps are truncated to this size. RLIMIT_CPU CPU time limit in seconds. When the process reaches the soft limit, it is sent a SIGXCPU signal. The default action for this signal is to terminate the process. However, the signal can be caught, and the handler can return control to the main program. If the process continues to consume CPU time, it will be sent SIGXCPU once per second until the hard limit is reached, at which time it is sent SIGKILL. (This latter point describes Linux 2.2 through 2.6 behaviour. Implementations vary in how they treat processes which continue to consume CPU time after reaching the soft limit. Portable applications that need to catch this signal should perform an orderly termination upon first receipt of SIGXCPU.) RLIMIT_DATA The maximum size of the process's data segment (initialized data, uninitialized data, and heap). This limit affects calls to brk() and sbrk(), which fail with the error ENOMEM upon encountering the soft limit of this resource. RLIMIT_FSIZE The maximum size of files that the process may create. Attempts to extend a file beyond this limit result in delivery of a SIGXFSZ signal. By default, this signal terminates a process, but a process can catch this signal instead, in which case the relevant system call (e.g., write() truncate()) fails with the error EFBIG. RLIMIT_LOCKS (Early Linux 2.4 only) A limit on the combined number of flock() locks and fcntl() leases that this process may establish. RLIMIT_MEMLOCK The maximum number of bytes of memory that may be locked into RAM. In effect this limit is rounded down to the nearest multi- ple of the system page size. This limit affects mlock(2) and mlockall(2) and the mmap(2) MAP_LOCKED operation. Since Linux 2.6.9 it also affects the shmctl(2) SHM_LOCK operation, where it sets a maximum on the total bytes in shared memory segments (see shmget(2)) that may be locked by the real user ID of the calling process. The shmctl(2) SHM_LOCK locks are accounted for sepa- rately from the per-process memory locks established by mlock(2), mlockall(2), and mmap(2) MAP_LOCKED; a process can lock bytes up to this limit in each of these two categories. In Linux kernels before 2.6.9, this limit controlled the amount of memory that could be locked by a privileged process. Since Linux 2.6.9, no limits are placed on the amount of memory that a privileged process may lock, and this limit instead governs the amount of memory that an unprivileged process may lock. RLIMIT_MSGQUEUE (Since Linux 2.6.8) Specifies the limit on the number of bytes that can be allocated for POSIX message queues for the real user ID of the calling process. This limit is enforced for mq_open(3). Each message queue that the user creates counts (until it is removed) against this limit according to the formula: bytes = attr.mq_maxmsg * sizeof(struct msg_msg *) + attr.mq_maxmsg * attr.mq_msgsize where attr is the mq_attr structure specified as the fourth argument to mq_open(). The first addend in the formula, which includes sizeof(struct msg_msg *) (4 bytes on Linux/x86), ensures that the user cannot create an unlimited number of zero-length messages (such mes- sages nevertheless each consume some system memory for bookkeep- ing overhead). RLIMIT_NICE (since kernel 2.6.12, but see BUGS below) Specifies a ceiling to which the process's nice value can be raised using setpriority(2) or nice(2). The actual ceiling for the nice value is calculated as 20 - rlim_cur. (This strangeness occurs because negative numbers cannot be specified as resource limit values, since they typically have special meanings. For example, RLIM_INFINITY typically is the same as -1.) RLIMIT_NOFILE Specifies a value one greater than the maximum file descriptor number that can be opened by this process. Attempts (open(), pipe(), dup(), etc.) to exceed this limit yield the error EMFILE. RLIMIT_NPROC The maximum number of threads that can be created for the real user ID of the calling process. Upon encountering this limit, fork() fails with the error EAGAIN. RLIMIT_RSS Specifies the limit (in pages) of the process's resident set (the number of virtual pages resident in RAM). This limit only has effect in Linux 2.4.x, x < 30, and there only affects calls to madvise() specifying MADV_WILLNEED. RLIMIT_RTPRIO (Since Linux 2.6.12, but see BUGS) Specifies a ceiling on the real-time priority that may be set for this process using sched_setscheduler(2) and sched_set- param(2). RLIMIT_SIGPENDING (Since Linux 2.6.8) Specifies the limit on the number of signals that may be queued for the real user ID of the calling process. Both standard and real-time signals are counted for the purpose of checking this limit. However, the limit is only enforced for sigqueue(2); it is always possible to use kill(2) to queue one instance of any of the signals that are not already queued to the process. RLIMIT_STACK The maximum size of the process stack, in bytes. Upon reaching this limit, a SIGSEGV signal is generated. To handle this sig- nal, a process must employ an alternate signal stack (sigalt- stack(2)). RLIMIT_OFILE is the BSD name for RLIMIT_NOFILE.

RETURN VALUE

On success, zero is returned. On error, -1 is returned, and errno is set appropriately.

ERRORS

EFAULT rlim points outside the accessible address space. EINVAL resource is not valid; or, for setrlimit(): rlim->rlim_cur was greater than rlim->rlim_max. EPERM An unprivileged process tried to use setrlimit() to increase a soft or hard limit above the current hard limit; the CAP_SYS_RESOURCE capability is required to do this. Or, the process tried to use setrlimit() to increase the soft or hard RLIMIT_NOFILE limit above the current kernel maximum (NR_OPEN).

BUGS

In older Linux kernels, the SIGXCPU and SIGKILL signals delivered when a process encountered the soft and hard RLIMIT_CPU limits were deliv- ered one (CPU) second later than they should have been. This was fixed in kernel 2.6.8. In 2.6.x kernels before 2.6.17, a RLIMIT_CPU limit of 0 is wrongly treated as "no limit" (like RLIM_INFINITY). Since kernel 2.6.17, set- ting a limit of 0 does have an effect, but is actually treated as a limit of 1 second. A kernel bug means that RLIMIT_RTPRIO does not work in kernel 2.6.12; the problem is fixed in kernel 2.6.13. In kernel 2.6.12, there was an off-by-one mismatch between the priority ranges returned by getpriority(2) and RLIMIT_NICE. This had the effect that actual ceiling for the nice value was calculated as 19 - rlim_cur. This was fixed in kernel 2.6.13. Kernels before 2.4.22 did not diagnose the error EINVAL for setrlimit() when rlim->rlim_cur was greater than rlim->rlim_max.

NOTES

A child process created via fork(2) inherits its parents resource lim- its. Resource limits are preserved across execve(2).

CONFORMING TO

SVr4, 4.3BSD, POSIX.1-2001. RLIMIT_MEMLOCK and RLIMIT_NPROC derive from BSD and are not specified in POSIX.1-2001; they are present on the BSDs and Linux, but on few other implementations. RLIMIT_RSS derives from BSD and is not specified in POSIX.1-2001; it is nevertheless present on most implementations. RLIMIT_MSGQUEUE, RLIMIT_NICE, RLIMIT_RTPRIO, and RLIMIT_SIGPENDING are Linux specific.

SEE ALSO

dup(2), fcntl(2), fork(2), getrusage(2), mlock(2), mmap(2), open(2), quotactl(2), sbrk(2), shmctl(2), sigqueue(2), malloc(3), ulimit(3), core(5), capabilities(7), signal(7) Linux 2.6.13 2005-09-20 GETRLIMIT(2)

1994 Man-cgi 1.15, Panagiotis Christias <christia@theseas.ntua.gr>